![\"GGS](\"https:\/\/chillroad.com\/wp-content\/uploads\/2026\/05\/Spider-Farmer-GGS-Grow-Room-Controller-Series-App-User-Manual_1-scaled-3.jpg\")
<\/p>\n<\/p>\n
![\"GGS](\"https:\/\/chillroad.com\/wp-content\/uploads\/2026\/05\/Spider-Farmer-GGS-Grow-Room-Controller-Series-App-User-Manual_2-scaled-3.jpg\")
<\/p>\n
1. Download the Spider Farmer app<\/strong> 3. Find and identify your Spider Farmer devices<\/strong><\/p>\n 3.1 Starting the device search<\/strong> 3.2 Troubleshooting Device Discovery<\/strong> Note<\/strong>: Restoring factory settings will delete all automation schedules and user accounts.<\/p>\n 3.3 Configuring the SF-GGS-AC5 Kit<\/strong> Use the RJ12 cable to connect the devices according to the diagram provided. (If you need to control the LED grow light, the GGS 2-in-1 adapter (included in this kit) is required. You will need to plug the light into the \u201clight\u201d port on the adapter.) 4. What data can you view on the Spider Farmer app?<\/strong><\/p>\n 4.1 Time display:<\/strong> 4.2 Day\/Night Icon:<\/strong> 4.3 VPD and temperature\/humidity display:<\/strong> Tip: Place the sensor at canopy level, in the center of your growing area, for more accurate readings.<\/p>\n 4.4 Displaying data on the ground:<\/strong> 4.5 CO\u2082 display:<\/strong> With an optional CO\u2082 sensor, you can monitor CO\u2082 levels directly, allowing you to optimize CO\u2082 concentration for faster growth. (Note: This sensor is sold separately and is not yet available in Europe\u2014stay tuned.)<\/p>\n PPFD 4.6 display:<\/strong> 4.7 Recommendations for Sensor Placement<\/strong><\/p>\n 5. Preparations before configuring the device\u2019s operations<\/strong><\/p>\n 5.1 Environmental Conditions Parameters<\/strong><\/p>\n 5.1.1 Day\/night cycle optimization:<\/strong> Define the time range for day and night periods. The day begins at the start time for the day and ends at the start time for the night, while the night begins at the start time for the night and ends at the start time for the day. If both start times are set the same way, the system defaults to 24-hour mode.<\/p>\n 5.1.2 Environmental conditions parameters:<\/strong> Set target values for temperature, humidity, and CO\u2082 levels during both day and night, as well as the deadband range.<\/p>\n 5.1.3 Dead zone control:<\/strong> Maintain stability. For example, if the daytime temperature is set to 70\u00b0F with a 3\u00b0F deadband, there is an upper and lower threshold. Cooling will turn on at 73\u00b0F and turn off once it reaches 70\u00b0F, while heating will turn on at 67\u00b0F and turn off at 70\u00b0F.<\/p>\n 5.2 Local Time Settings<\/strong> 5.3 Multilingual Support<\/strong> 6. How to Control LED Grow Lights (G Series\/SE Series\/SF Series)<\/strong> 6.1 Manually adjust the brightness for precise light control:<\/strong> 6.2 Automate your lighting schedule:<\/strong><\/p>\n 6.2.1 Start and end times:<\/strong> Easily set specific on and off times for your lights, so your plants can benefit from consistent lighting cycles without manual adjustments.<\/p>\n 6.2.2 Brightness levels:<\/strong> Set the exact light level for each cycle, ensuring that your plants receive optimal light intensity.<\/p>\n 6.3.1 Go Dark:<\/strong> Set a high-temperature threshold for dimming. When the room temperature reaches this threshold, the lights will automatically dim to 11 % to prevent overheating.<\/p>\n 6.3.2 Stop:<\/strong> Set a higher temperature threshold for a complete shutdown. When this threshold is reached, the lights will turn off automatically to protect your plants and equipment.<\/p>\n 6.4 Sunrise\/sunset simulation:<\/strong><\/p>\n Enable this feature to simulate changes in natural light, with brightness gradually increasing at sunrise and gradually decreasing at sunset.<\/p>\n Example: <\/strong>If you set the lighting schedule from 8:00 AM to 8:00 PM with a brightness level of 100 % and a sunrise\/sunset setting of 30 minutes, the lights will gradually increase from 0 % to 100 % brightness between 8:00 AM and 8:30 AM. In the evening, starting at 7:30 PM, the brightness will gradually decrease from 100 % until the lights turn off completely at 8:00 PM.<\/p>\n 7. How to control inline fans, clip-on fans, and other equipment<\/strong><\/p>\n Key steps in the process:<\/strong><\/p>\n How can you tell if your clip-on fan or inline fan has an RJ12 port?<\/strong><\/p>\n![\"GGS](\"https:\/\/chillroad.com\/wp-content\/uploads\/2026\/05\/Spider-Farmer-GGS-Grow-Room-Controller-Series-App-User-Manual_3-scaled-3.jpg\")
\nFeatures and settings of the Spider Farmer app<\/strong><\/p>\n
\nSearch for \u00abSpider Farmer\u00bb on Google Play or the App Store and download the app.<\/p>\n![\"GGS](\"https:\/\/chillroad.com\/wp-content\/uploads\/2026\/05\/Spider-Farmer-Google-Play-App-Store.png\")
\n2. Language, Registration, and Bluetooth<\/strong>
\nOnce the app is open, select your language and sign up with your email address. The app will then ask you to turn on Bluetooth.<\/p>\n![\"GGS](\"https:\/\/chillroad.com\/wp-content\/uploads\/2026\/05\/language-set.jpeg\")
<\/p>\n
\nTap the plus icon to start searching for nearSpider Farmer devices.
\nThe detected devices will appear in the app, and you can identify them by their icons.<\/p>\n
\nIf you can't find your device, try the following steps depending on the type of device:<\/p>\n\n
\nIf you purchased the SF-GGS-AC5 kit, follow these steps:<\/p>\n
\nMake sure all devices are plugged into a power source, as the RJ12 cable does not provide power. The sensor only requires the RJ12 connection.
\nOpen the app, search for your devices, and tap the Power Strip icon to start the setup.<\/p>\n![\"GGS](\"https:\/\/chillroad.com\/wp-content\/uploads\/2026\/05\/GGS-Power-Strip-AC5-diagram.png\")
<\/p>\n![\"GGS](\"https:\/\/chillroad.com\/wp-content\/uploads\/2026\/05\/Finding-and-Identifying-Your-Spider-Farmer-Devices.png\")
<\/p>\n
\nQuickly and easily check the current date and time in your grow room.<\/p>\n
\nSee at a glance whether your grow tent is in its light or dark cycle. A sun icon appears when light is detected, and a moon icon appears during dark periods. This feature allows you to monitor lighting conditions without opening the tent. (Requires the temperature, humidity, and light sensor included in this GGS AC5 power strip kit)<\/p>\n
\nGet accurate readings of temperature, humidity, and vapor pressure deficit (VPD). (Requires the temperature, humidity, and light sensor included in this GGS AC5 power strip kit; ;<\/p>\n
\nIdeal for soil growers, this display shows real-time soil temperature, moisture, and electrical conductivity (EC).<\/p>\n
\n(This kit does not include the sensor required to measure this data.<\/span> (Please purchase the GGS Pro Sensor Kit separately.)<\/p>\n
\n(This kit does not include the sensor required to measure this data.<\/span> (Please purchase the GGS Pro Sensor Kit separately.)<\/p>\n![\"GGS](\"https:\/\/chillroad.com\/wp-content\/uploads\/2026\/05\/Setting-Up-Your-Preferences-and-Calibration-Options-in-the-App.png\")
<\/p>\n![\"GGS](\"https:\/\/chillroad.com\/wp-content\/uploads\/2026\/05\/temp-humi-light-soil-sensor.png\")
<\/p>\n
\nSet your local time on the controller. This is necessary when setting operating times, such as for lights.<\/p>\n
\nOur system offers several language options to ensure ease of use, including English, German, French, Spanish, Italian, and Chinese.<\/p>\n
\n(Note: A GGS 2-in-1 adapter is required to control LED grow lights via the GGS power strip. This adapter is included in the kit.)<\/p>\n![\"GGS](\"https:\/\/chillroad.com\/wp-content\/uploads\/2026\/05\/Spider-Farmer-GGS-Grow-Room-Controller-Series-App-User-Manual_4-scaled-2.jpg\")
<\/p>\n
\nSet the brightness between 10 % and 100 %, giving you full control over the light intensity at all times. For a quick shutdown, setting the brightness to 0 % will turn off the lights. Any setting between 0 % and 10 % automatically operates at 10 % brightness.<\/p>\n\n
![\"GGS](\"https:\/\/chillroad.com\/wp-content\/uploads\/2026\/05\/Spider-Farmer-GGS-Grow-Room-Controller-Series-App-User-Manual_5-scaled-2.jpg\")
<\/p>\n![\"GGS](\"https:\/\/chillroad.com\/wp-content\/uploads\/2026\/05\/Spider-Farmer-GGS-Grow-Room-Controller-Series-App-User-Manual_6_2-1.jpg\")
<\/p>\n![\"GGS](\"https:\/\/chillroad.com\/wp-content\/uploads\/2026\/05\/Spider-Farmer-GGS-Grow-Room-Controller-Series-App-User-Manual_7-scaled-2.jpg\")
<\/p>\n![\"GGS](\"https:\/\/chillroad.com\/wp-content\/uploads\/2026\/05\/Spider-Farmer-GGS-Grow-Room-Controller-Series-App-User-Manual_8-scaled-1.jpg\")
<\/p>\n